In most computers, fans do a pretty good job of keeping electronic components cool. But for people who want to use high-end hardware or coax their PCsinto running faster, a fan might not have enough power for the job. If a computer generates too much heat, liquid cooling, also known as water cooling, can be a better solution. It might seem a little counterintuitive to put liquids near delicate electronic equipment, but cooling with water is far more efficient than cooling with air. air cooling vs water cooling: There are two reasons why a computer might need the increased thermal conductivity and heat capacity of water

AIR COOLING vs WATER COOLING

  • Its electronic components produce more heat than the air around them can absorb
  • The fans required to move enough air to cool all the components make too much noise or use too much electricity

In other words, there are two reasons why you might need to cool a computer with a liquid instead of air:

  • The components inside your computer need more cooling than air alone can provide
  • You want your system to be quieter

 advantage of  water cooling :

  • Liquid cooling is a much more efficient system at drawing heat away from the processor and outside of the system for overclocking the CPU,GPU & RAM
  • reduction of noise within the computer
  • TO make PC look good by properly arrange the part

disadvantages of liquid cooling :

  • most prominent disadvantages are size and technical skills required to install a kit.
  • Liquid cooling kits require a large amount of space within the computer case to work effectively
  • if the system is not properly installed, leaks could cause severe damage to the components inside of the system.

to select fans for radiator click here

What You Need ?

Case:In LC system case must be big to properly arrange  the cooling components for proper flow of water and air. least it can supported mini 240mm radiator

RADIATOR:In general  it heat exchange .A radiator that can dispels heat into the air

Cooling block: blocks are  are used cool the component .we can to cooled through water cooling.blocks are may types

  • CPU BLOCK
  • GPU BLOCK
  • RAM BLOCK
  • MOTHER BOARD BLOCK 
  • HDD BLOCK

PUMP:pump is used to circulate water in system or A pump that moves coolant through the system

RESERVOIR:A coolant reservoir that holds extra fluid and allows easy addition of coolant

TUBING :tube are used flow the water from one component to others

FITTINGS: Genral fitting are connect the one component with other component through tubing.FITTINGS are tow types

  • compression fitting
  • Barb fittings

Liquid: TO cool the component we need the coolant .some of coolant are water 

IMAGES:

CPU,GPU,MOBO & RAM:

PUMP:

RESERVOIR

RADIATOR:

FITTINGS :

coolant:

TUBING:

website to buy:

please provide me comments about threat .